Table of Contents
Old Blackberry Version
Wind Speed (mph)
Known Dist (in)
These are the current weather conditions.
Zero in the warm, shoot in the cold
This is important.
Two kinds of pressure
Weather forecast "Barometric" pressure is the seal level value, so type in your current altitude to correct the pressure.
If you are measuring actual pressure at your location, just leave the altitude as zero, no correction is needed.
Barometric (Weather Report, Sea Level)
0(dry)-100(damp)%. It doesn't make much difference.
If you are using "adjusted for sea level" pressure that they use in weather reports, type in the altitude.
If you are measuring the actual press at you location, leave this as zero.
Set to your altitude for Barometric/Weather Report
Set to 0 for Station/Pressure
A single number instead of Temp/Pressure/Humidity/Altitude